Combustion Chamber: · Horizontal cylindrical design · Inner surface carried out with first-rate refractory material, high temperature proof, · Combustion chamber volume; 5,3 approximately. · 1 No. loading door set on the frontal edge of the burning chamber, having a whole section crossing, suitable to load the Hospital waste material and to unload the ashes. · Burner capacity (under full power) 30-40 Kg/ Hour approximately · Operating Temperature: 700-900 cXC or better · Standard Color: Black HICLOVER YD30(PLC) 30-50 kg/hour 60kg/feeding PLC Automatic 360L(0.36M3) 100x60x60cm 200L Yes Manual 220V 2P 0.5Kw Read More
Medical Waste Incinerator Capacity: average 50-100 kgs per hour Items/Model TS50(PLC) Picture Principle Medical Waste Incineration Burn Rate Average 50-100 kg/hour Feed Read More
Municipal solid waste incineration equipment Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) Burn Rate (Average) 10 kg/hour 20 kg/hour 30 kg/hour 50 Read More
1. N95 and Disposable Mask Machine 2. 400mm and 1600mm Melt blown Production Line 3. ES Fiber Production Line Read More
N95 Face Mask Machine Production Line on Sale Now! $250,000USD per set N95 Face Mask Machine Production Line on Sale Read More
Zhangjiagang Tengxiang Machinery Co., Ltd. Mobile: 0086-13962221749(whatsapp) Wechat: chncheumg Email: [email protected] 平面口罩机参数： Semi-Automatic Mask Machine l Power supply: 3.3KW mono phase l Mask Read More
HICLOVER Medical Waste Incinerator in Stock(Finished and Semi-finished and New Production) Model Capacity/Burnning Rate For Hospital SickBed No. Fuel Type Read More
The oven is provided with supply burner, which turns on automatically when the temperature of the gas combustion, after the last air combustion injection, falls under the target temperature of 850 °C or 1.100 °C. The burner is used as well during the start and stop system operations, this is to guarantee a regular temperature of 850 °C or 1.100°C during these operations and as long as the waste material remains in the combustion chamber. All burners have a non-stop ventilation system, to avoid damages to stoke wholes, openings), and to the deflector group, caused by high working temperatures they are exposed, when reached the fixed limit they go on stand-by. Burners are also provided with instruments for the pyrometric temperature check, to keep automatically the incineration oven and the post-combustion chamber to the fixed planned temperatures.Particles removal system is a humid working installation, composed by a Scrubber connected through a pipe, fully covered with refractory material on the gas exit coming out form post-combustion chamber. The system turns on when the incineration oven comes into action and turns off once the planned cycle is complete. Particles purification occurs through water that sprinkled at high pressure, from special nozzles placed on the transit section, wets the fine particles held in the coming out fumes dragging them away.Capacity 100kg/Hr Electricity Requirement Read More
Common, well-proven and clean technology – both as a complete unit and in terms of its individual components. Robust and sturdy for installation in remote locations. As labor free as possible, easy to use and operated by trained but mostly unskilled operators. Require minimal pre-processing, limited need for prior sorting, crushing or shredding.Capable of handling mixed solid waste streams (non-recyclable waste with some mix of organic waste, garden waste, burnable materials such as waste wood and clothing). It can accommodate large variations in waste composition and calorific value.Operated on a daytime shift basis, five (5) days per week. Have very low unburned materials in the slag.Economical to operate and maintain and have a low and efficient fuel consumption. Have an operation manual in English.Catalogues/brochures are required. Detail Specifications for Waste Incinerators:The equipment should have a minimum life time operation often (10) years in a tropical environment.Average loading capacity of 1,000 kg/day with maximum loading capacity of 1,200 kg.